Floor grinder – Core Synthesis Technology https://www.wixhc.com/cn CNC industry leader Thu, 28 Dec 2023 07:12:04 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.5 Floor grinder wireless remote control DH22ST-Le https://www.wixhc.com/cn/product/dh22st-le Thu, 28 Dec 2023 05:26:11 +0000 https://www.wixhc.com/cn/?post_type=product&p=100263

model：DH22ST-Le

Adaptive equipment：Floor grinder

Remark：Three types of antennas can be selected，The default suction cup antenna is equipped with standard

emergency stop：The emergency stop button was photographed，Please release the emergency stop button

Low pressure：The battery of the remote control is too low，Please replace the battery

Fall out of the internet：Wireless signal interruption，Please check the receiver power supply，Power on again，Restart the remote control

1、Remote control turned on
The receiver is powered on，The RF-LED light on the receiver starts to flash；Two No. 5 batteries installed on the remote control，Turn on the power switch，Display display motor speed，It means the startup is successful。
2、illumination

Click the "Lighting" button，Receiver lighting output is on，A lighting icon appears on the display

Click the Light button again，Receiver lighting output is off，Photo icon disappears from display。

3、Grinding motor and speed regulation
Turn the "Forward/Reverse" switch to forward，Receiver grind forward turn open，The display displays forward rotation
Turn the "Forward/Reverse" switch to reverse，Receiver Grind Reversal Open，Display display inversion

Turn the "Grinding Speed" knob，You can adjust the receiver grinding speed output voltage 0-10V；

4、Travel motor and speed regulation
Turn the "Forward/Reverse" switch to forward，Receiver Revolver Progress and Right Progress Open，Display forward

Turn the "Forward/Reverse" switch to the back，Receiver reversal and right wheel reversal open，Display back

Turn the "walking speed adjustment" knob，You can adjust the speed output voltage of the left and right wheels of the receiver from 0-10V.；
5、Turn left and right

Turn the "Left/Right" switch to the left，Receiver right wheel advances to open，The display display turns left

Turn the "Left/Right" switch to the right，Receiver revolver advance opens，The display display turns right
6、Turning in place
Turn left in place：Press and hold the Enable button，Move the "turn left/right" switch to the left turn position，Receiver left wheel reverse and right wheel forward open，Start turning left in place；
Turn right in place：Press and hold the Enable button，Move the "turn left/right" switch to the right turn position，Receiver left wheel forward and right wheel reverse open，Start turning right in place；
7、emergency stop

Take the emergency stop button，Receiver emergency stop output is disconnected；All switches are off，All speeds cleared；

8、Straight line correction
When the left and right motor is moving forward and backward，There is a difference in the left and right speeds，Straight-line walking is offset，The linear deviation correction function of the remote control can be used，Fine-tune the speed of left and right wheels；
Principle of correction：Through bias correction function，Fine-tune revolver speed，To achieve the same speed as the right wheel，Realize the synchronization of left and right wheel speeds，Eliminate offsets；
Correction operation method：Press and hold the Enable button，Slowly turn the "Linear Correction" knob；
Rotate clockwise，Increase the revolver speed voltage，Increased deviation correction value of the display screen；
Rotate counterclockwise，Reduce the revolver speed voltage，The display deviation correction value is reduced；

Correction range：Correction value -90 to 90；1The correction voltage of a correction unit is about 0.04V；

9、Parameter menu (user prohibits private modification)
Enter parameter menu mode：When grinding is 0，Forward/reverse rotation 3 times in a row，Break it off 3 more times；
Exit method：Choose to save or not save，Press the enable button to confirm；
Linear fine adjustment range：0-120；
Grinding speed：0-3000；
walking speed：0-1000；

Receiver operating power supply
DC24V/1A (independent power supply)
Receiver output point load AC0-250V/3A DC0-30V/5A
Receiver speed regulation output voltage DC0-10V

The final right to interpret this product belongs to Chengdu Xinshen Technology Co., Ltd.。

]]> Floor grinder industrial automation control remote control DH22-2R-7K https://www.wixhc.com/cn/product/%e5%9c%b0%e5%9d%aa%e7%a0%94%e7%a3%a8%e6%9c%ba%e5%b7%a5%e4%b8%9a%e8%87%aa%e5%8a%a8%e5%8c%96%e6%8e%a7%e5%88%b6%e9%81%a5%e6%8e%a7%e5%99%a8dh22-2r-7k Tue, 19 Apr 2022 01:33:16 +0000 https://www.wixhc.com/cn/?post_type=product&p=55671

]]>