Welcome to Chengdu Xinhecheng Technology Co.,Ltd.

Contact us
Address: Chengdu City, Wuhou District, Wuhou Entrepreneurship Center
CNC Mach3 motion control card-MKX-IV
Auther: Pubdate:2016-12-17



     MKX-IV has 3 series:
        1. MK3-IV:3 axis motion card.
        2. MK4-IV:4 axis motion card.
        3. MK6-IV:6 axis motion card.
     works with Mach3 CNC system under all windows platform

2、Application overview

3、Product overview

4、Signal connection

5、Key feature

    1.Standard usb device and work at all windows with usb hot plug.
    2.The card state is monitored.
    3.Support 6 axis to motion at the same time.
    4.Step Pulse frequncy Up to 2000khz,support servo and step motor driver.
    5.The usb state indication with led
    6.All io is isolated,anti-noise and stable performance
    7.Spindle control with PWM and step/pulse
    8.Aluminum shell,shield the interference.

6、General Characteristics

Parameter Description


Axis drive control:


 Isolated oc output  Voltage:5V,maximum load :20A
 type STEP/DIR
 Maximum Step frequency  2000KHZ
 Number of support axis MK3-IV:3 axis 
MK4-IV:4 axis
MK6-IV:6 axis
Spindle control  Analog output voltage  0-10V
 Digital PWM output  5V,1KHZ,fill factor:%1-100%
 STEP/DIR Minimum frequncy:15Hz
Maximum frequncy:4KHz
8 digital output  Maxmimum load of output line  50mA
 Maxmimum voltage on out line  25V
16 digital input Maxmimum load of input line  5mA
maximum voltage on input line  25V
 PC connection  Standard USB2.0


MKX-IV motion card

1 piece

Use wire 1 piece
Driver disk 1 disk
MACH3-USB trouble shooting 1 book
MACH3 config and driver installation 1 book
MKX –IV user Manual 1 book
Package box size 275*144*42mm
weigtht 0.7KG