One，Steps for usage

1.Install the receiver，Connect the receiver to the device，Please download the manual for details

2.Install the battery on the remote control after the receiver is installed，Turn on the power switch for normal use

three，Receiver introduction

1、DB15 plug
The receiver supports two specifications of DB15 plugs：Triple and Double Row；(See model selection below for details)
2、work indicator
DB15 cable to connect the receiver to the system，and after power on，Work indicator flashes；
3、pair key
When the receiver and handwheel lose signal connection，Or after replacing the handwheel or receiver alone，handwheel
and the receiver need to be re-paired，to be used normally；
Pairing method：When the receiver is powered on and the working light is on，Press and hold the key for 5 seconds and then release，start hand
wheel power，Any turn the switch on the handwheel，until the signal light on the handwheel lights up，Indicates that the code is successful；
4、external antenna
External antenna with mushroom head，Can be fixed outside the case，Then use the antenna to connect the mushroom head
connect to the receiver，Antenna length 1.5 meters。